About: Open Turbostation:SerialPort   Sponge Permalink

An Entity of Type : owl:Thing, within Data Space : dbkwik.org associated with source dataset(s)

NOTE: This is a 3.3V TTL 232 communication protocol - you should level shift the cable so that a PC can see 5V TTL. There are a variety of ways to do this - most are documented at the nslu2-linux website. Use a Serial Console and Adding a serial port.

AttributesValues
rdfs:label
  • Open Turbostation:SerialPort
rdfs:comment
  • NOTE: This is a 3.3V TTL 232 communication protocol - you should level shift the cable so that a PC can see 5V TTL. There are a variety of ways to do this - most are documented at the nslu2-linux website. Use a Serial Console and Adding a serial port.
dbkwik:scratch-pad...iPageUsesTemplate
dbkwik:scratchpad/...iPageUsesTemplate
abstract
  • NOTE: This is a 3.3V TTL 232 communication protocol - you should level shift the cable so that a PC can see 5V TTL. There are a variety of ways to do this - most are documented at the nslu2-linux website. Use a Serial Console and Adding a serial port. The easiest method is to purchase a FTDI USB TTL-232R-3V3 cable (e.g. here, or through international distributors). This enables a host machine to connect to the turbostation via a USB connection and interact directly with the U-Boot Bootloader. You could however use a level shifter (e.g. Maxim 3232) to enable the serial port to power other RS232 based devices.
Alternative Linked Data Views: ODE     Raw Data in: CXML | CSV | RDF ( N-Triples N3/Turtle JSON XML ) | OData ( Atom JSON ) | Microdata ( JSON HTML) | JSON-LD    About   
This material is Open Knowledge   W3C Semantic Web Technology [RDF Data] Valid XHTML + RDFa
OpenLink Virtuoso version 07.20.3217, on Linux (x86_64-pc-linux-gnu), Standard Edition
Data on this page belongs to its respective rights holders.
Virtuoso Faceted Browser Copyright © 2009-2012 OpenLink Software