The frame was solid (meaning an integrated "bridge" was fitted over the cylinder for a more durable design) with a smooth barrel protruding forwards and marked with a forward blade sight just aft of the muzzle. The barrel measured a standard length of 5.5 inches while the revolver exhibited an overall length of 10.8 inches. A rear notch sight was also included in the design. The trigger ring was integrated into the receiver itself and managed a curved, double-action trigger assembly. This "doubleaction" terminology meant that no manually-actuated cocking of the hammer was required on the part of the operator - he need only pull the trigger and the hammer cocked automatically (though it could still be managed manually if so desired). The pistol grip was well-contoured downwards for a firm h